Відео

Hi Darian you can find a set for drilling holes with a counter sink an a plug cutter google drill and plug cutter set Or counter sink the screw head and cover it with a mixture of glue and sawdust sand when dry

@@RusticDavid nice great advice. What’s your thoughts on wood putty?

Its a broad term there’s good and bad i can only suggest buying what’s available in your area and giving it a try, main problem is it dries up in it’s container before you have chance to use much of it! I use a nitrocellulose resin and mix into it fine sawdust the company is german I believe called Bormawachs it dries fast bormawachs.com/?&lang=2

Hi Bruce glad you enjoyed the Video good luck with your purchase

Glad you enjoyed the video Good luck with your project David

Thanks for your feedback! Im happy you liked it! Gordon Ramsey ? I’ll google him

Well we’re the same age both giving tutorials but i dont have a Wiki!!!!

@@RusticDavid aww 💙 ur content is awesome, i’m sure you will get a wiki soon I bet 😄

Thank you glad you liked it

Glad you like it, Give it a go fun project Have a great weekend David

Hi Bill glad you liked the video have a great week

Hi Muantea I don’t know where you are in the world, check out my website rusticdavid.com you’re welcome to visit I mainly teach these days. Thanks for your interest, practice practice practice and you will master the craft, good luck and best wishes David

Glad you enjoyed it,Good luck with your project David

Hi Davor i hear you are sceptical give it a go , try pulling or pushing a board out , if you secure the wood like i show in the video nothing moves Have a great weekend David

@@RusticDavid well, I'll be trying it today, hopefully it doesn't fly off 😂

@@davorzdralo8000 hi davor pull it down tight stack the wood widest boards at the bottom on the ropes on the sheet material then tie like in the video (use a longer rope than i had!!)check its all secure try pulling boards out if they dont move youre ready to go drive slowly good luck

Hi Ruth, thanks for your comment, good luck with your project

Glad you liked the video,Have a great weekend

Thanks for your comment glad you liked it, good luck with your project David

That’s good to hear! Thanks for commenting! Have a good weekend

@@RusticDavidLikewise!

Well yes but not the best it’s going to do rough work, best wishes David

Hi the hole drilled in the top board should be the same diameter as the screw in soft wood this is usually enough if you encounter splitting drill a smaller hole in the boar you are connecting to. For example 4 mm screw top board 4mm hole connecting board 2.5 mm hole I hope that helps you best wishes David

Hi Chris Thank you for your message have a great week

Hi thanks for your message Good luck with your dining table

Hi Vitoh are you saying sandpaper costs a lot where you are? If so try making your own cabinet scraper check out this link ua-cam.com/users/shortsd5Vn3B1915s?si=CIp5069-oyA6zZ6Y And search “ make your own card/cabinet scraper “ Good luck best wishes David

My pleasure Thanks for your comment have a great week

Yes you’re right the price of hard woods has gone through the roof recycle reuse and repurpose! I get great satisfaction using materials that have had a previous life . Have a good weekend

Hi thank you so much for keeping me updated! Im so happy to be helpful that’s why I made these videos so you can get started in woodwork. Don’t stop making stuff its the best way to learn dont worry about mistakes fix them and move on. Have a great weekend David

Hi thanks for your feedback good luck with your project Have a great weekend David

Hi well or you can chisel a hole around the head and try gripping it with a “mole grip” that’s the English name I think in other countries it has different names Try hammering the correct bit into the stripped head then try removing screw Or if its possible use a hacksaw blade and cut the screw between the two pieces screwed together Ot use brute force like a crowbar or hammer to snap the screw Good luck thanks for your comment

Thanks Glad you liked it

Thanks for your feedback, Good luck with your project,one mans rubbish is another mans treasure

Hi Shana you can find all the details including telephone and email address on our website www.rusticdavid.com Have a great weekend David

Hi Thanks, I wish I was in the Philippines too!! But there’s plenty of my videos free on my UA-cam channel. Happy Woodworking David

Hi Chris Thank you. Have a great weekend

Thank you Ian have a great weekend

@@RusticDavid You too buddy. Stay safe.

Thanks Good to hear from you too Have a great weekend

Hi it’s true what you say , but for a small shelf its stable enough, to stop the wobble ( technical name racking) you need to add diagonal braces across the corners or a back panel like a piece of thin plywood, or blocks of wood glued and screwed or nailed inside the corners. I hope this helps you Good luck with your project David

Hi Tony Good for you!! Knock the nails in at a slight angle / one to the left one to the right this will prevent them pulling straight out wit the seasonal movement of the wood Angling the nails is called” toe nailing “ Good luck with your project David

Hi Annie thank you for your feedback, Yes it’s gonna make a lot of dust maybe not the tool of choice for a floor if you already live there a belt sander with a dust bag works well or a commercial machine that is made for floors can be rented Good luck with your project

Hi Glad you liked the video Best wishes David

Hi Ian How are you doing? Thanks for that I will do my best. Have a great weekend

Hi I totally agree, i made this video for a subscriber that asked the question “how can i cut a circle without a jigsaw?” I thought it might be useful for anyone without a jigsaw for a one off project and also just to help think outside of the box, often we can get the job done with what we have. Thanks for your comment, and the polite way you phrased it Have a great weekend David

Hi Jonny, Thank you for your kind words.I am very happy that you enjoyed the video and are inspired to make a Rustic Stool. Go for it it is a great type of woodworking that I really enjoy, you can go with the flow allowing the natural curves of the wood to decide how each piece will look. Have fun Happy Woodworking David

Hi Mugabie I think you should visit this part of the world and see with your own eyes what the situation is, my pharmacist is a muslim Arab israeli so is my doctor so is my mechanic also the cashier in my local convenience store and the owner of the shawarma fast food takeaway where I sometimes eat my lunch some of my students are also Muslim Arab Israelis and they all have the same rights as Israeli citizens like myself I am not Jewish either and I don’t feel that there is discrimination against me, So please don’t believe all you see and hear about this country in the media come and see for yourself. BTW Jews cannot live in Gaza they cannot live in Syria they cannot live in Lebanon or Iran or Iraq, they did once but were killed and forced out by Islamists how do you feel about that? Have a good day David

Glad you like it,Good luck with your project David

That is a good question, I really should i am nearly 3 years in my new place I will keep it in mind when I have time to do a new Video. Thank you for your feedback have a great week David

Thanks good to know I’m not alone! Have a great week David

Hi Elad this mixture is “danish oil” its not a hard finish you could add tung oil to make it harder wearing, I have been putting it on chairs and tables for many years with great success If you remove your shoes when walking on the floor no problem Good luck with your project David

@@RusticDavid Thank you very much. Will it be still better though than just linseed oil?

@@eladsadeh In my opinion yes ,linseed oil will need many coats over a long period of time, 3 coats of danish oil will do ,in areas of heavy traffic give another coat

I have to say I can tell you do have empathy for the Palestinians and I do appreciate that! I hope the region will find peace one day!!

Hi Yazen I am no authority , but I think all this killing is wrong it cannot be made right by any amount of words. I am sure that all this violence will only lead to Palestinian and Jewish kids growing up with more hate for one another. I don’t think we should believe what the “authorities “ report ,War is a terrible thing the innocent get killed But does that give any of us the right to seek revenge? I don’t think revenge will help From where i stand it looks like Israel is fighting for its existence Hamas , Hizbollah Islamic Jihad and other Islamic groups have clearly stated again and again that what they want is to eradicate the jews and the state of Israel. Personally I believe that this is their goal and therefore support Israel in the war against hamas. Thanks for your question may we all see peace in the world

Thanks for watching happy to hear that you enjoyed the video have a great weekend

I would say war is a terrible thing and every death is a tragedy, Israel did not start this war Israel wants peace with its neighbours Our Enemies want to kill all of us and destroy the State of Israel , if you think that is a good idea I don’t think we can have a serious discussion about the subject

Hi ,I can’t say I have any experience with steel bar. But i have had success on sheet metal more polishing than flattening, good luck remember to stop often and allow the disc to cool good luck with your project

Hi Wayne , its a good exercise in hand sawing , definitely worth having a go